Publicité
10
www.electrolux.com
comes on. Touch
Set the heat setting in 10 seconds.
You can operate the hob. When you
deactivate the hob with
operates again.
4.10 Power limitation
Originally the hob is at its highest possible
power level.
To decrease or increase the power
level:
1. Deactivate the hob.
2. Touch
comes on and goes off.
3. Touch
comes on.
4. Touch
power level.
Power levels
Refer to "Technical information" chapter.
• P0 — 7200 W
• P1 — 1500 W
• P2 — 2000 W
• P3 — 2500 W
• P4 — 3000 W
• P5 — 3500 W
• P6 — 4000 W
• P7 — 4500 W
• P8 — 5000 W
• P9 — 6000 W
CAUTION!
Make sure that the selected
power fits to the house
installation fuses.
4.11 Power management
function
• Cooking zones are grouped according
to the location and number of the
phases in the hob. See the illustration.
• Each phase has a maximum electricity
loading of 3700 W.
5. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
for 4 seconds.
the function
for 3 seconds. The display
for 3 seconds. P0 to P9
of front left zone to set the
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking zones
connected to a single phase exceeds
3700 W.
• The function decreases the power to
the other cooking zones connected to
the same phase.
• The heat setting display of the reduced
zones changes between two levels.
Power management function with
Power limitation function
When you set the Power limitation function
to 4.5 kW or less, power of the hob is
divided between all cooking zones.
When you set the Power limitation function
to more than 4.5 kW, power of the hob is
divided between two cooking zones in a
pair.
Publicité
