Publicité
Attention:
The operator bears personal responsibility for compliance with all safety regula-
tions applicable to the machine, not only by themselves but also by all persons who
may be exposed to risks from the machine.
It is therefore important to read this manual carefully before carrying out any work
on the machine, since it contains the instructions and procedures for correct and
safe operation. Retain this manual for future reference.
9. Design characteristics
The machine has been planned and designed in compliance with the
fundamental safety and hygiene regulations of the Machinery Directive
89/392/EEC and its later supplements.
Due to the fact that the operator comes into direct contact with the ma-
chine, the following was particularly important:
- Elimination of sharp and pointed parts; avoidance of unstab le conditions
that could lead to tipping and falling hazards and inappropriate mo-
vements;
- Avoidance of the operator coming into direct contact with parts that
could cause electric shock or injury during machining;
As well as anything else that is necessary for safe use.
WWW.TOOL-IS.COM
29
Publicité
