Publicité
WWW.TOOL-IS.COM
1. Warranty
The buyer must check on delivery that the machine is comp lete. Missing
parts or anomalies must be reported within the legally prescribed period.
Any attempt to make
forcible modifications to any component of the machine and/or to any
signage shall invalidate the warranty, the CE marking (if it has been affixed
by the manufacturer), the declaration of conformity or the manufacturer's
declaration.
The manufacturer shall also not be liable in the following cases:
- Incorrect installation
- Improper use of the machine by insufficiently trained personnel.
- Non-compliance with applicable safety regulations
- Insufficient maintenance
- Use of non-original or unsuitable replacement parts
The product is only approved for industrial applications.
25
Publicité
