Publicité
□
When the sensor is ON/OFF (also plus LED power supply), circuit wiring diagram is as below.
（ON/OFF）
Motion Sensor
N
L'
N
L
LED+ (RED)
LED+ (BLACK)
Care and Cleaning
CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from
the fuse box.
□ Clean the fixture with a soft, dry cloth.
□ Do not use cleaners with chemicals, solvents, or harsh abrasives.
□ Do not use liquid cleaner on the LEDs, LED driver, or wiring inside the light fixture.
DIM+
LED Power (DRIVER)
DIM-
L
LED DRIVER
drive+
drive-
N
B+ (Anode)
B- (Cathode)
9
Please contact 1-855-384-7754 or further assistance.
LED+
LED lamp panel
LED-
(ON/OFF)
Motion Sensor
L (Black)
L' (Black)
N (White)
N (White)
www.ETiSSL.com
Publicité
