Publicité
Installation (continued)
4
Connecting the wires
□ Connect the hot and neutral (black and white) wires from the housing (A) to the same color wires from the electrical box.
□ Cover the wire connection using the single wire connector (CC).
□ Connect the green wire from the housing (A) to the grounding wire from the electrical box. Secure together using
a single wire connector (CC).
NOTE: Please refer to below wire and curcuit diagram if end user has demand for the 0-10V dimmer installation.
Connect the black wire and wire L together.
□
Connect the white wire and wire N together.
□
Connect the green wire and earth wire together.
□
Connect the purple wire and the anode of the dimmer, and connect the gray wire and the cathode of the dimmer.
□
Finally, fix all of them with single wire connector (CC).
□
To ballasts
Purple(+)
Anode(+)
Gray(-)
Cathode(-)
CC
Black(+)
White(-)
Green(E)
L
N
AA
A
DIM-
DIM+
LED Power (DRIVER)
6
DIM+
0-10V
Dimmer
-
LED+
LED lamp panel
LED-
Publicité
