Télécharger Imprimer la page

ETI Solid State Lighting WR-2-20-940-MV-D Guide D'utilisation Et D'entretien page 3

Publicité

Pre-Installation
PLANNING INSTALLATION
Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with the package
contents list. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service
for replacement parts.
NOTE: Keep your receipt and these instructions for proof of purchase.
If you are unfamiliar with electrical installations, we recommend you contact a qualified electrician to do the installation.
NOTE: Two people are recommended for the installation of this light fixture.
TOOLS REQUIRED
Wire Strippers
Flathead
Screwdriver
Safety
Goggles
Phillips
Screwdriver
3
Ladder
Power Drill
with drill bits
Please contact 1-855-384-7754 or further assistance.
Gloves
Wire
Cutters
www.ETiSSL.com

Publicité

loading

Produits Connexes pour ETI Solid State Lighting WR-2-20-940-MV-D

Ce manuel est également adapté pour:

Wr-4-40-940-mv-d5465544154676241