Publicité
Safety instructions
complied with at all times. There must be reference to the remaining dangers
connected with displacement measurement technique.
Conversions and modifications
The transducer must not be modified from the design or safety engineering
point of view except with our express agreement. Any modification shall
exclude all liability on our part for any damage resulting therefrom.
Qualified personnel
This instrument is only to be installed by qualified personnel strictly in
accordance with the technical data and with the safety rules and regulations
which follow. It is also essential to observe the appropriate legal and safety
regulations for the application concerned. The same applies to the use of
accessories.
Qualified personnel means persons entrusted with the installation, fitting, com
missioning and operation of the product who possess the appropriate qualifica
tions for their function.
Conditions on site
Protect the transducer from damp and weather influences such as rain, snow,
etc.
Accident prevention
The relevant accident prevention regulations of the trade safety associations
must be taken into account.
4
WI
A01028_05_Y00_01 HBM: public
Publicité
