Publicité
2. Install a short blade of the correct type. Refer to
select the correct blade dimension and installation
position on page 9 and To replace the blade on page
17 .
WARNING:
The blades are very sharp.
3. Make sure that the blade is sharp. Sharpen the
blade if it is necessary. Refer to
blade on page 17 .
4. Cut linear ditches in the floor. Make sure that the
distance between the ditches is the same as the
width of the long blade.
5. Install a long blade of the correct type. Refer to
select the correct blade dimension and installation
position on page 9 and To replace the blade on page
17 .
6. Make sure that the blade is sharp. Sharpen the
blade if it is necessary. Refer to
blade on page 17 .
7. Remove the floor between the ditches.
Blade applications
Floor type
VCT – Tile (Vinyl Composition
Tile)
1804 - 001 - 06.05.2022
All manuals and user guides at all-guides.com
Use protective gloves.
To sharpen the
To sharpen the
Blade application
Do not use a blade wider than the dimension of the tile being removed. If the tiles do
not come up clean or the machine jumps on top of the tiles, install a smaller blade
until proper blade size is found or use a smaller portion of the blade.
To
Note:
Use a chisel and move the product in a fan
shape pattern to remove tiles and floors made of
wood.
To
13
Publicité
