Using Tether Anchor; Important - Munchkin Brica Cruisin Baby In-Sight Guide D'utilisation

USING TETHER ANCHOR

IMPORTANT: Do not attach this mirror to your
vehicle's tether anchor if a child safety seat is using
the same anchor.
1. Position mirror on seat back in front of tether
anchor location.
2. Insert clamp between seat back and rear deck
of your vehicle.
3. Bend clamp to conform to shape of seat back.
4. Attach strap's clip to vehicle tether anchor
and tighten strap.
5. Unfasten adjustable stands from clamp and tilt mirror
to desired angle so that the child is visible to the
driver in the vehicle's rearview mirror.
NOTE: If you own a minivan, station wagon or SUV, you may need a tether extender
to reach the tether anchor. Please visit munchkin.com to purchase a tether extender.
ON FRONTSEAT HEADREST
IMPORTANT: This method is used for mounting
mirror to backside of front seat to entertain forward-
facing children.
1. Raise headrest and slide clamp underneath.
2. Wrap adjustable stands over top of headrest.
3. Bend clamp to conform to shape of seat back.
4. Attach strap's clip to D-ring.
5. Lower headrest to secure mirror.
6. Tighten strap and adjust mirror so that the child
can see themselves.
How to Use
Adjustable Stands
Clamp
Clip
Strap
Clamp
Fastener
Clip
Tether Anchor
D-Ring
Adjustable
Stands
9