Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
How to Install
USING TETHER ANCHOR
IMPORTANT: Do not attach the mirror to your
vehicle's tether anchor if a child safety seat is
using the same anchor.
1. Position the mirror on seat back in front of
tether anchor location.
2. Insert clamp between seat back and rear
deck of your vehicle.
3. Bend clamp to conform to shape of
seat back.
4. Attach strap's clip to vehicle tether anchor
and tighten strap.
5. Tilt mirror to desired angle so that the child
is visible to the driver in the vehicle's
rearview mirror. Fasten adjustable stands to
the clamp to hold desired position.
NOTE: If you own a minivan, station wagon or SUV, you may need a tether extender to
reach the tether anchor. If you need a tether extender, please visit munchkin.com.
ADJUSTING FAN POSITION
The fan has multiple positions to allow you
to direct the airflow. Only adjust the position
when fan is turned off.
1. Press the top of the inner cylinder of the
fan to move the fan upward.
2. Press the bottom of the inner cylinder of
the fan to move the fan downward.
8
OPERATING THE MIRROR
Adjustable stands
1. Press the power button on the mirror front to turn fan functions on. This will also
Strap
activate low fan speed.
Clip
IMPORTANT: The power button on the mirror front must be pressed first BEFORE
the remote can function.
2. Press the power button on mirror front or remote control a second time to activate
high fan speed.
STANDBY: To help preserve battery life, the fan will stop automatically after 10 minutes
Tether anchor
and then enter a 20 minute standby mode. During standby, the remote control can be
used to reactivate the fan. If not reactivated within 20 minutes, the fan will shut off and
Clamp
the remote control will not function until the mirror front power button is pressed again.
3. Press the power button on mirror front or remote control a third time to stop the fan.
NOTE: For optimum performance, ensure the remote control transmitter has an
unobstructed view of the mirror transmitter.
CLEANING THE MIRROR
Wipe with clean, damp cloth. Do not bleach. Air dry. Do not submerge in water.
How to Use
9
Publicité
Table des Matières
