Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
How to Use
ATTACHING THE MIRROR
ON BACKSEAT HEADREST
1. Raise backseat headrest and slide clamp
underneath.
2. Wrap adjustable stands over top of headrest.
3. Bend clamp upward to conform to headrest.
4. Attach strap's clip to D-ring.
5. Lower headrest to secure mirror in place.
6. Tighten strap and adjust mirror to desired
angle so that the child is visible to the driver
in the vehicle's rearview mirror.
ON BENCH SEAT
1. Position mirror on top of seat back.
2. Bend clamp to conform to top of seat back.
3. Squeeze clamp firmly to secure mirror in place.
4. Unfasten adjustable stands from clamp and tilt
mirror to desired angle so that the child is visible
to the driver in the vehicle's rearview mirror.
NOTE: If a tether anchor is accessible and not in use
by a child safety seat, attach strap's clip to tether
anchor and tighten strap. This will help increase the
stability of the mirror. If you own a minivan, station
wagon or SUV, you may need a tether extender to
reach the tether anchor. Please visit munchkin.com
to purchase a tether extender.
8
D-Ring
Adjustable
Stands
Adjustable
Stands
Clip
Strap
Clamp
Fastener
Clamp
Publicité
Table des Matières
