Publicité
DW936/384286-01
3/15/00
8:25 AM
PERSONAL SAFETY
• Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use tool while tired or under
the influence of drugs, alcohol, or medication. A moment of
inattention while operating power tools may result in serious
personal injury,
• Dress properly. Do not wear loose clothing or jewelry. Contain
long hair. Keep your hair, clothing, and gloves away from moving
parts. Loose clothing, jewelry, or long hair can be caught in moving
parts.
• Avoid accidental starting. Be sure switch is in the locked or
off position before inserting battery pack. Carrying tools with
your finger on the switch or inserting the battery pack into a tool
with the switch on invites accidents.
• Remove adjusting keys or wrenches before turning the tool
on. A wrench or a key that is left attached to a rotating part of the
tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times.
Proper footing and balance enables better control of the tool in
unexpected situations.
• Use safety equipment. Always wear eye protection. Dust
mask, non-skid safety shoes, hard hat, or hearing protection must
be used for appropriate conditions.
TOOL USE AND CARE
• Use clamps or other practical way to secure and support the
workpiece to a stable platform. Holding the work by hand or
against your body is unstable and may lead to a loss of control.
• Do not force tool. Use the correct tool for your application. The
correct tool will do the job better and safer at the rate for which it is
designed.
• Do not use tool if switch does not turn it on or off. A tool that
cannot be controlled with the switch is dangerous and must be
repaired.
• Disconnect battery pack from tool or place the switch in the
All manuals and user guides at all-guides.com
Page 1
• Store idle tools out of reach of children and other untrained
• When battery pack is not in use, keep it away from other
• Maintain tools with care. Keep cutting tools sharp and clean.
• Check for misalignment or binding of moving parts, breakage
• Use only accessories that are recommended by the
SERVICE
• Tool service must be performed only by qualified repair
• When servicing a tool, use only identical replacement parts.
Additional Safety Rules
• Hold tool by insulated gripping surfaces when performing an
1
locked or off position before making any adjustments,
changing accessories, or storing the tool. Such preventative
safety measures reduce the risk of starting the tool accidentally.
persons. Tools are dangerous in the hands of untrained users.
metal objects like: paper clips, coins, keys, nails, screws, or
other small metal objects that can make a connection from
one terminal to another. Shorting the battery terminals together
may cause sparks, burns, or a fire.
Properly maintained tools, with sharp cutting edges are less likely
to bind and are easier to control.
of parts, and any other condition that may affect the tools
operation. If damaged, have the tool serviced before using. Many
accidents are caused by poorly maintained tools.
manufacturer for your model. Accessories that may be suitable
for one tool, may create a risk of injury when used on another tool.
personnel. Service or maintenance performed by unqualified
personnel may result in a risk of injury.
Follow instructions in the Maintenance section of this manual. Use
of unauthorized parts or failure to follow Maintenance Instructions
may create a risk of shock or injury.
operation where the tool may contact hidden wiring. Contact
with a "live" wire will also make exposed metal parts of the tool
"live" and shock the operator.
Publicité
