Publicité
DW936/384286-01
3/15/00
8:26 AM
on "Adjustments and Set-Up" and "Operation" for procedures and
techniques that will minimize the occurrence of kickback.
Cleaning
Use only mild soap and a damp cloth to clean the tool. Many
household cleaners contain chemicals which could seriously damage
plastic. Also, do not use gasoline, turpentine, lacquer or paint thinner,
dry cleaning fluids or similar products. Never let any liquid get inside
the tool; never immerse any part of the tool into a liquid.
Lubrication
Self lubricating ball and roller bearings are used in the tool and
relubrication is not required. However, it is recommended that, once a
year, you take or send the tool to a certified service center for a
thorough cleaning, inspection, and lubrication of the gear case.
Important
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by certified service centers or other qualified service
organizations, always using identical replacement parts.
Accessories
Recommended accessories for use with your tool are available at
extra cost from your local dealer or authorized service center. If you
need assistance in locating any accessory for your tool, contact:
D
WALT Industrial Tool Co., 70 East Joppa Road, Baltimore, MD
E
21286. 1-800-4-D
WALT
E
CAUTION: The use of any other accessory not recommended
for use with this tool could be hazardous.
All manuals and user guides at all-guides.com
Page 12
Full One Year Warranty
D
date of purchase. We will repair, without charge, any defects due to
faulty materials or workmanship. For warranty repair information, call
1-800-4 D
damage caused where repairs have been made or attempted by
others. This warranty gives you specific legal rights and you may have
other rights which vary from state to state.
In addition to the warranty, D
If you are not completely satisfied with the performance of your
D
seller within 30 days for a full refund. Please return the complete unit,
transportation prepaid. Proof of purchase may be required.
12
WALT heavy duty industrial tools are warranted for one year from
E
WALT. This warranty does not apply to accessories or
E
WALT tools are covered by our:
E
30 DAY NO RISK SATISFACTION GUARANTEE
WALT heavy duty industrial tool, simply return it to the participating
E
Publicité
