Publicité
Connecting the headset
a. Connecting to your Xbox
a. Power on you Xbox console
b. Plug the USB dongle into the USB port of your Xbox console.
c. Make sure the Mode switch is in the down position
d. Press and hold the power button located on the left earcup of the headset.
e. The headset should automatically pair to the dongle.
b. Connecting to PC
a. Follow the same steps from above, but insert the dongle into any USB port on a PC
c. Connecting to Bluetooth
a. Make sure the device that you are pairing to has Bluetooth on.
b. Make sure the Mode switch on the headset is in Bluetooth mode, the up position.
c. If this is the first time connecting a device to the headset, press and hold the Bluetooth button on the front of the headset.
d. On your device list you should see "Phantom Air Wireless Headphone" as an option to connect.
e. Select "Phantom Air Wireless Headphone" to connect the headset.
f.
g. Once the connection is made with that device, you can automatically pair with it in the future if the device has Bluetooth
•
Pairing the Headset to the dongle
a. If the headset does not automatically pair
a. Make sure the headset is off. If the headset is on, press and hold the power
b. With the dongle plugged into your Xbox, power on your headset.
c. Then, press and hold the green button on the dongle and double press the power button on the headset.
Note: The Headset needs to be discounted from Bluetooth before you can repair it to the dongle.
Once connected, you will hear a voice prompt "Connected" and the LED status light will turn solid.
turned on.
button until the LED turns off.
Publicité
