Publicité
Features
•
Each zone can independently select a zone-specific stereo audio source or the global mono Audio
Bus input (unbalanced)
•
Each zone can be independently configured for stereo 4 Ohm/8 Ohm mode, high powered bridged
8 Ohm mode or 70V/100V mode for total flexibility within a given installation
•
All zones are independently controllable via RS232, IR and voltage trigger lines
•
Each zone has -20dB Audio Limiter
•
Each zone has an independent mute trigger input (activated by +3 to +30V DC)
•
Each zone has an individual Trigger Output (+12V DC) that coresponds to zone ON/OFF status
•
Front panel features "Zone ON" and "Zone Overload" LED indicators for each zone
•
Master global Control In (+3 to +30V DC) and Control Out (+12V DC)
•
Detachable screw-terminal connectors for global Audio Bus IN/OUT, Zone IR IN, Zone Mute, Zone
Status OUT and Zone Speaker Outputs
•
Rack mountable in standard 19" rack (2U height)
•
Selectable 110/220 AC volatge
What's Included
1 - 0E-IA1250 Amplifier
1 - IR Remote Control
1 - AC Power Cord
1 - User Manual
NEVER CHANGE ANY OF THE FOLLOWING SETTINGS WHEN THE 0E-IA1250 IS TURNED
ON OR CONNECTED TO AC POWER:
70V/100V HIGH VOLTAGE SPEAKER OUTPUT
ZONE 8Ω/4Ω - 70V/100V SWITCH
ZONE STEREO/BRIDGED SWITCH
VOLTAGE SELECT SWITCH (110/220VAC)
DOING SO CAN CAUSE SEVERE DAMAGE TO THE 0E-IA1250 AND/OR CONNECTED
SPEAKERS. THIS TYPE OF DAMAGE IS NOT COVERED UNDER WARRANTY.
All manuals and user guides at all-guides.com
CAUTION!!!
5
Publicité
