Publicité
RS232 Commands
NAME
Bass Decrement
Balance
Balance Step Left
Balance Step Right
Zone Activity Auto Update
Zone Max. Volume
Where:
{z#} - Zone Number. Range is 1..6
{c#} - Channel Number. Range is 1..12
{0/1} – Either 0 (zero) or 1 (one). 0 – Off, 1 – On.
{v#} - Volume Setting. Range is 0..38. See VOLUME LEVEL table below.
{bt#} - Bass/Treble Setting. Range is 0..14. See BASS/TREBLE LEVEL table
below.
{b#} - Balance Setting. Range is 0..63. See BALANCE LEVEL table below.
All manuals and user guides at all-guides.com
0E-IA1250 RS232 COMMANDS
COMMAND
!{z#}BD+
!{z#}BA{b#}+
!{z#}BL+
!{z#}BR+
!ZA{0/1}+
!{z#}MX+
24
REMARKS
Enable/Disable Auto Update
of the Zone Information when
Zone Activity is Detected. (See
below for format of the output.)
Sets current volume setting as a
maximum desired volume
level for a specific zone. The
volume is first adjusted to
what is desired as a maximum
level. The Zone Max. Volume
command is then activated to
lock in the setting. This acts as
a volume limiter for the system
Publicité
