Publicité
Connections
Control Connections
ZONE IR IN
This connection allows IR control of the connected zone for zone power, volume, mute, Line/Bus, etc
using the commands from the 0E-IA1250 IR Remote and a connected IR control system.
0E-IA1250 Zone IR Input
1. IR/GND - Using a 2-circuit 3.5mm mini plug cable, connect the IR Emitter OUT of an IR control
system to the IR IN and GND terminals on the appropriate 0E-IA1250 zone. Connect the white
stripe (tip) to IR IN, connect the black (sleeve) to GND.
NOTE: Polarity of IR Emitter 3.5mm plugs/jacks is typically tip = signal, sleeve =GND.
All manuals and user guides at all-guides.com
IR Connecting Block
Zone IR Connections
15
IR Receiver
12VDC
Power Supply
IR Remote
Publicité
