iHealth BP5 Instructions page 6

INSTALLING THE APP
Download the iHealth Pro App from the App Store and install it on your iPad. Use the
search terms "iHealth Pro" or "iHealth BP5(ABI)". Alternatively, you can find a direct link
to download the App on www.iHealthLabs.eu.
CHARGING THE BATTERIES
• First charge the device by connecting the mini-USB cables in the devices and con-
necting them to a power source. The monitors will not work until the batteries have
enough power.
• When you charge the monitors, a small LED on the device will display different col-
ors indicating the charge status.
Charging
Fully charged
Low battery
Abnormal state
LINKING THE MODULES TO YOUR iPad
• Once the devices are fully loaded, press the START/STOP button on the side of the
devices. The Bluetooth Indicator Light on the devices will begin flashing.
• On your iPad, turn the Bluetooth "On" under the "Settings" Menu (Settings->Blue-
tooth->On).
• Wait until the model number printed on
the side label of the monitor (i.e. "BP5 xxxxx
x") and "Not Paired" appear in the Bluetooth
Menu, and select the model name "BP5 xxxx
xx" to pair and connect. The Bluetooth Indicat
or Light will stop flashing once pairing is suc
cessful. When using the monitor for the fi rst
time, it may take up to 30 seconds for your
iOS device to detect the Bluetooth signal.
GETTING PREPARED FOR A BLOOD PRESSURE MEASUREMENT
Blood pressure measurements should ideally be taken when relaxed. When ready to
take the reading, sit the patient down with his back straight. Position the cuff so that
it is at the level of the heart.
4
Flashing green light
Steady green light
Flashing red light (for a few seconds)
Steady red light
-
-