Publicité
ENGLISH
All manuals and user guides at all-guides.com
STEP 2 – BACK OF THE HEAD
•
With the comb set at 12 mm or 18 mm, cut the hair at the back of the head.
STEP 3 – SIDE OF THE HEAD
•
With the comb set at 3 mm or 6 mm, trim sideburns. Then change to the longer 9 mm
guide comb and continue to cut the top of the head.
STEP 4 – TOP OF THE HEAD
•
Use the longer length comb attachment and set it to 24 mm or 27 mm then cut hair on
top of the head against the direction in which the hair normally grows.
•
For longer hair on top, use the longer length comb attachment (25 – 35 mm) to achieve
the desired style.
•
Always work from the back of the head.
STEP 5 – THE FINISHING TOUCHES
•
Use the clipper without an attachment comb for close trimming around the base and
sides of the neck.
•
To produce a clean straight line at the sideburns, reverse the hair clipper.
•
Place the reversed clipper at right angles to the head, tips of the blades lightly touching
the skin and then work downwards.
MICRO FADE ADJUSTABLE COMB
The micro fade adjustable comb allows precision cutting in the 1 to 5 mm range.
Use the adjustment dial to set the comb to the desired length.
TURBO
•
To run in Turbo mode, slide the on/off switch to the turbo position.
CARE FOR YOUR HAIRCLIPPER
•
Your clipper is fitted with high quality blades.
•
To ensure long lasting performance of your clipper, clean the blades and unit regularly.
•
Always keep the attachment guide comb on the trimmer blade.
AFTER EACH USE
•
Ensure the appliance is switched off and
•
Brush the accumulated hair from the blades and body of the clipper. Do not submerge
the clipper in water.
•
To clean unit, wipe with a damp cloth and dry immediately.
•
Place a few drops of cutter or sewing machine oil onto the blades. Wipe off excess oil.
WASHABLE BLADE CLEANING
•
The blades are washable under a running tap but must be removed before they are
cleaned in this way. Keep the body of the device dry at all times.
•
To remove the blades ensure the unit is switched off. Push the blade set away from the
clipper body using your thumb (Fig A).
6
unplugged from the charger before cleaning.
Publicité
