Publicité
9.1
GENERAL MAINTENANCE
•
Before each use, examine the machine for damaged,
missing, or loose parts such as screws, nuts, bolts and
caps.
•
Tighten correctly all the fasteners and caps.
•
Clean the remaining snow on the machine with a brush.
9.2
REPLACE THE SCRAPER
24
24
WARNING
Use only approved replacement scrapers.
WARNING
Wear heavy gloves or wind cloth around the impeller when
you touch the impeller.
1. Remove the screws (24) from each side plate.
2. Remove and discard the old scraper (8).
3. Install the new scraper (8).
4. Put in the mounting screw (25) and spacers and tighten
them.
9.3
REPLACE THE IMPELLER
WARNING
Use only approved replacement scrapers.
1. Remove the 5 screws (24) and side wear pad (26) that
secure the right side cover (31).
English
25
11
2. Remove the nut (27).
3. Remove the 5 screws (24) and side wear pad(26) that
secure the left side cover (31).
4. Remove the belt (28).
EN
Publicité
