Publicité
9
7
RESET
Press RESET to return to the default settings.
TROUBLE SHOOTING
PROBLEM
SYMPTOM
Abnormal /
Remote
strange
sensor
readings
Cannot locate
remote sensor
Cannot change
channel
Data does not
match main unit
PRECAUTIONS
Do not subject the unit to excessive force, shock,
•
dust, temperature or humidity.
Do not cover the ventilation holes with any items
•
such as newspapers, curtains etc.
Do not immerse the unit in water. If you spill liquid
•
over it, dry it immediately with a soft, lint-free cloth.
Do not clean the unit with abrasive or corrosive
•
materials.
Do not tamper with the unit's internal components.
•
This invalidates the warranty.
Only use fresh batteries. Do not mix new and old
•
batteries.
Images shown in this manual may differ from the
•
actual display.
When disposing of this product, ensure it is collected
•
separately for special treatment.
Placement of this product on certain types of wood
•
may result in damage to its finish for which Oregon
Scientific will not be responsible. Consult the furniture
manufacturer's care instructions for information.
The contents of this manual may not be reproduced
•
without the permission of the manufacturer.
Do not dispose old batteries as unsorted municipal
•
waste. Collection of such waste separately for
special treatment is necessary.
Please note that some units are equipped with
•
a battery safety strip. Remove the strip from the
battery compartment before first use.
NOTE The technical specifications for this product and
the contents of the user manual are subject to change
without notice.
All manuals and user guides at all-guides.com
SPECIFICATIONS
TYPE
Weight
Temperature range
Resolution
Humidity range
Humidity resolution
Signal frequency
Transmission range
No. of channels
Power
ABOUT OREGON SCIENTIFIC
REMEDY
Visit our website (www.oregonscientific.com) to learn
Press
more about Oregon Scientific products. If you're in
RESET
the US and would like to contact our Customer Care
department directly, please visit: www2.oregonscientific.
Check battery
com/service/support
OR
Check location
Call 1-800-853-8883.
Check sensors.
For
Only one sensor
oregonscientific.com/about/international
is working
Initiate a manual
sensor search
EU-DECLARATION OF CONFORMITY
Hereby, Oregon Scientific, declares that this Integrated
Thermo-Hygro Wind Sensor (model: WTGR800) is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC. A copy of the
signed and dated Declaration of Conformity is available
on request via our Oregon Scientific Customer Service.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation.
ency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee
4
DESCRIPTION
556 g (19.6 oz)
without battery
-30°C to 60°C
(-4°F to 140°F)
0.1°C (0.2°F)
25% - 90%
1%
433 MHz
100 m (328 ft) unobstructed
1 wind and 1 temperature / humidity
4 x UM-3 (AA) 1.5 V batteries
international
inquiries,
COUNTRIES RTTE APPROVAL COMPLIED
All EU countries, Switzerland
WARNING Changes or modifications not expressly
NOTE This equipment has been tested and found
please
visit:
www2.
CH
and Norway
N
Publicité
