PERS
PARCOB100HEX
ID
TEMP
EDIT
SET
CAL 1
CAL 2
Master/slave mode (auto-running, sound control)
This mode will allow you to link up 32 units together without a controller. Use standard DMX cables to daisy chain your units
together via the DMX connector on the rear of the unit.
DMX-protocol for PARCOB150MKII
Channel
Value
Function
Dimmer: 0-100%
1
0-255
Red: 0-100%
2
0-255
3
0-255
Green: 0-100%
4
0-255
Blue: 0-100%
Color Change
5
0-30
No function
31-50
R 100%/G 0~100%/B 0%
© Copyright LOTRONIC 2016
AR1.D Run 4 channel mode Dimmer/Red/Green/Blue
AR1.5 Run 5 channel mode Dimmer/Red/Green/Blue/Strobe
HSV.
Adjust Color in Hue (0~255), Saturation (0~255)and Value (0~255)
STRG Run static mode ,13 channel with details on dmx protocol
ARC.1 Run 3 channel mode Red/Green/Blue
AR1.D Run 4 channel mode Dimmer/Red/Green/Blue
ARC.2 Run 6 channel mode Red/Green/Blue/Amber/White/UV
AR2.D Run 7 channel mode Dimmer/Red/Green/Blue/Amber/White/UV
AR2.5 Run 8 channel mode Dimmer/Red/Green/Blue/Amber/White/UV/Strobe
HSV.
Adjust Color in Hue (0~255),Saturation (0~255)and Value (0~255)
ID01 to ID66 to set different fixture
CURR show current fixture temperature
This function is working for Auto PR01 to PR10, each PR with 30 scenes, each scene with 8 steps
PR.01 to PR.10 to set 10 programs
SC.01 to SC.30 to set 30 different scenes
R.000
select red color from 0~255
G.000
select green color from 0~255
B.000
select blue color from 0~255
Y.000
select amber color from 0~255 (only PARCOB100HEX)
W.000 select white color from 0-255 (only PARCOB100HEX)
U.000
select UV color from 0~255 (only PARCOB100HEX)
ST.00
select strobe speed from 0~20
T.000
select auto mode total running time
F.000
select auto mode fade time
UPLD sending data to next fixture with built-in program
REST reset fixture
ID
OFF/ON
RGB
OFF/ON Adjust the correct color per RGB (only PARCOB150MKII)
RGBW OFF/ON Adjust the correct color per RGBWA (only PARCOB100HEX)
POW HIGH/NORM select different power consumption with HIGH 100% and Norm 33%
DIM
OFF/DIM1/DIM2/DIM3/DIM4
White balance adjustment
WT01 to WT.11 to adjust R/G/B/W from 0~255
Ps: in static DMX mode, channel 6 can show 11 shades of white
RGB adjust correct color for RGB
RGB adjust from 25~255
PARCOB150MKII / PARCOB100HEX
Page 5