Reheat Function; Defrost Function; Cleaning And Maintenance; Cleaning The Toaster - Brandt GP100X Manuel D'instruction

Masquer les pouces Voir aussi pour GP100X:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Only when the power supply is switching on, the carriage handle can rest on the
bottom of slot.
During the toasted process, you may observe the toasting color. If it is satisfying, you
press the Cancel button to cancel the operation at any time.

3.2 Reheat function

automatically spring up and end up the reheating process. To use the "extra lift" function,
pull up manually the carriage handle.

3.3 Defrost function

If the bread has been taken out from freezer: press carriage handle
down vertically until it is positioned in place, set color controller to your
desired color. Then press Defrost button and the indicator of it will be
illuminated. The carriage handle will automatically spring up.

4 CLEANING AND MAINTENANCE

4.1 Cleaning the toaster

Before cleaning the toaster, unplug it and wait for it to cool down
Clean the outside of the toaster with a damp cloth.
Do not use solvents or abrasive products to clean the toaster.
To remove any crumbs pull out the crumb tray. Clean the tray with soapy water and
dry it carefully before putting it back into its slots.
Do not submerge the toaster in water or any other liquid or place it under the tap.
The crumb tray should be cleaned regularly. Do not allow breadcrumbs to
accumulate in the bottom of the toaster.
If you want to reheat the cold toasted bread, press the Reheat button
and the indicator of it will be illuminated. In this mode toasting time is
fixed, so long as time is running over, the carriage handle will
21
.

Publicité

Chapitres

Table des Matières
loading

Table des Matières