Publicité
Figure 1.
Pour the lava granules into the burner
support covering the burner completely.
Figure 2.
Place the larger rocks
allowing gaps for proper air flow.
Figure 3.
Lay the smaller stones on top of the
larger stones allowing gaps for proper
air flow.
YOU MUST MAINTAIN THE LAYOUT AS SHOWN TO ENSURE PROPER OPERATION OF YOUR FIRE PIT.
IF YOU NEED TO REPOSITION ANY MATERIAL TO MAINTAIN THE PROPER LAYOUT, USE HEAT
RESISTANT GLOVES OR ALLOW MATERIAL ADEQUATE TIME TO COOL BEFORE HANDLING.
Note: Lava granules used in a fire pit when heated up to normal operating temperatures can cause trapped gasses or
moisture in the porous stone to expand and may "pop" and "launch" outside of the fire pit, which could cause damage or
injury. Caution should be exercised when heating up the fire pit with lava granules to normal operating temperatures.
CERAMIC ROCK MEDIA PLACEMENT
Ceramic Rock Placement
(See Figure 1, 2 and 3)
CAUTION: BURN HAZARD. FIRE PIT MEDIA
WILL REMAIN HOT FOR SOME TIME AFTER USE.
Page 8
Publicité
