Publicité
All manuals and user guides at all-guides.com
Calibration of the
barometer
The watch has been
calibrated at the
factory. Under normal
use you do not need to
calibrate the barometer.
For advanced users,
however, the watch is
adjustable.
Press the "MODE" key
for around 2 seconds to
confirm the settings.
E_GA_GC350-400.indd 67
Calibration of absolute
pressure
The watch can adapt the cur-
rent pressure measurement to
an absolute pressure value.
Before calibration of the
barometer you should contact
the nearest weather station
to find out the air pressure of
your current position.
In the current time mode
press the "PILOT" key until
Calibration to factory
settings
Keep pressing the "PILOT"
key until the altitude indicator
"BARO" appears. Press
"MODE" for 2 seconds.
The flashing "SET" symbol
and "AIRP." are displayed. By
again pressing the "MODE"
key you change to the indica-
tor "F.DEF".
the altitude indicator "BARO"
appears.
Press "MODE" for 2 seconds.
The flashing "SET" symbol
and "AIRP." are displayed.
After pressing the "CHRONO"
key the current pressure flashes
in the display. You can change
the value with the "CHRONO"
and "LAP/RESET" keys.
With the "CHRONO" and
"LAP/RESET" keys you can
choose between "YES" and
"NO". With "YES" you return
to the factory setting.
Then press the "MODE" key
for 2 seconds to confirm the
settings.
The watch returns to barome-
ter mode.
22.12.2006 11:59:10 Uh
67
Publicité
