Publicité
7.
Assembling
7.1
OS-SZ1 / OS-SZ2
7.1.1
Installing focus system
Place the focusing system on the pillar and, once the desired
height is reached, tighten the locking knob ① located on the back
of the focusing system. (Fig. 1)
7.1.2
Connecting incident light cable
Insert the cable plug into the socket at the top of the pillar ②.
(Fig. 2)
7.1.3
Installing the head
Install the head and screw the fixing knob ③. (Fig. 3)
7.1.4
Installing the eyepieces
Remove the dust caps from the eyepiece sleeves and insert the
eyepieces. (Fig. 4)
All manuals and user guides at all-guides.com
Page 6
②
③
①
F ig. 1
F
ig. 1
F ig. 2
F
ig. 2
F F ig. 3
ig. 3
F ig. 4
F
ig. 4
Publicité
