Publicité
6.
Before using the appliance for the fi rst time
NOTICE!
Possible material damage!
Without a fixed base, the fan may tilt and fall over.
The fan may only be used or switched on after assembly is complete.
WARNING!
Risk of injury!
Risk of cuts due to rotating rotor blades.
Do not put your fingers or objects through the protective grille in the housing.
Remove all packaging materials.
Mount the appliance as described below.
6.1. Mounting the base
Plug both halves of the base together
until you hear them click into place.
Ensure that both parts are correctly
connected to each other and that the
underside of the base is level.
Turn the tower fan upside down and
unscrew the fastening nut from the un-
derside of the tower fan.
Attach the stand to the thread on the
underside of the tower fan.
Make sure that the two bolts (B) engage
in the respective groove (A).
84
Fig. – Mounting the base
Fig. – Assembly step
Fig. – Assembly step
A
B
Publicité
