Publicité
4.DAILY ALARM AND SNOOZE FUNCTION SETTING
4.1 Setting the Daily Alarm
► Press once "
" button, can switch the display calendar or alarm.
► Press and hold down "
buttons to set the required hour.
►Press "
" button to confirm your setting, the Minute display starts to flash. Use the "▲" and "▼" buttons to set the
required minute.
► Press "
" button to confirm your setting and to end the setting procedure
F.Y.I.:
► After 20 seconds without pressing any button the clock switches automatically from setting mode to Normal clock
mode.
4.2 Switching ON/OFF the alarm signal
► The alarm shift switch is pushed in the " " position, LCD display the "
open
► Press back of the alarm shift switch is pushed in the "
close
► When alarm is ring, press any button except the "
reactivate the alarm. It switches itself automatically to the alarm time which has already been set.
4.3 Snooze Function:
► Touch the "
" field or press the "
signal sounds again after approx. 5 minutes.
5.WEATHER FORECAST AND BAROMETRIC
5.1 Weather Forecast
► The weather station calculates a weather forecast for about the next 8 hours based on the barometric pressure
trend. Of course this forecast can't compare to that of professional weather services supported by satellites and high
performance computers, but merely provides an approximate indication of current developments. Please take the
weather forecast from your local weather forecasting service into account as well as the forecast from your weather
station. If there are discrepancies between the information from your device and from the local weather forecasting
service, please take the advice of the latter as authoritative.
► The weather station displays the following weather icon for next 8 hours weather forecast not current weather:
FJ3378-DCF Handbuch
" button for 2 seconds until Alarm Time hour display starts to flash. Use the "▲" and "▼"
" button the alarm signal sounds to get to SNOOZE mode. The alarm
" icon next to the date, the alarm function is
" position, the "
" icon disappears, the alarm function is
" button to stop the alarm signal. It is not necessary to
6
Publicité
