Publicité
correct month.
► Press "
" button to confirm your setting, the Date display starts to flash. Now use "▲" and "▼" buttons to set the
correct date.
► Press "
" button to confirm your setting, the week display language starts to flash. Now use "▲" and "▼" buttons
to set the correct language .
► Press "
" to confirm your setting and to end the setting procedures.
F.Y.I.:
► After 20 seconds without pressing any button, the clock switches automatically from Set Mode to Normal Time
Mode.
► The time zone must be set correctly according to the weather station area, or when the time signal is received, the
time will be incorrect
3.2 Automatic Time Setting
► The Weather Station automatically starts the DCF Signal search up to 7 minutes of any restart or change of
batteries. Or press and hold down the"▲" button for 2 seconds to manually start the DCF signal search.
► The radio mast icon "
will be automatically set. If no signal is found within 7 minutes the radio mast icon will disappear and it will
automatically start searching again in 1 hour.
► At 1:00 / 2:00 / 3:00am the Weather Station automatically carries out a synchronization procedure with the DCF
signal to correct any deviations to the exact time. If this synchronization attempt is unsuccessful (The radio mast
symbol disappears from the display), the system will automatically attempt another synchronization at the next full
hour. This procedure is repeated automatically up to 5 times.
F.Y.I.:
► A flashing radio mast icon indicates that the DCF signal reception has started
►A continuously displayed radio mast icon indicates that the DCF signal was received successfully
► We recommend a minimum distance of 8 feet to all sources of interference, such as televisions or computer
monitors
► Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such extreme
circumstances, place the system close to the window.
► During the RC receive mode, only the"
backlight will not lighting. If you want to carry out other functions of operation, please press "▲" button to exit the
RCC receiving mode.
FJ3378-DCF Handbuch
" will flash showing it is searching for signal. Once the signal is found the Time and Date
" and "▲" button function, other button operation have no function and
5
Publicité
