Publicité
6. Bluetooth
pairing
®
Note - pairing
• Ensure that the Bluetooth
activated .
• Please refer to the operating instructions of your device for more information .
The earphones and the device should not be more than 1 metre apart . The shorter the distance, the
better .
Ensure that the earphones are switched on .
1
Check the status of the status LED (3)
If the status LED (3) on one of the earphones is flashing:
the earphones are searching for a Bluetooth
white
white
off
-enabled device is switched on and that the Bluetooth
®
If the status LED (3) of an earphone is flashing and then going
out:
the earphones are already paired with a Bluetooth
function is
®
connection .
®
device .
®
8
Publicité
