Publicité
5. Charging
Fully charge the earphones and the charging box once before using them for the first time .
Insert the earphones and connect the charging box
1
2
Charging procedure for the charging case and earphones
The status LED on the charging case (2) flashes red during the charging process . Once the charging
box is fully charged, the charging box LED (2) lights up red .
It can take up to 2 hours (earphones and charging box) until the batteries are fully charged .
CHARGING
3
Battery capacity
Charging box
When the battery level is low (<20%), the status LED (2) flashes green four times and then goes
out .
Earphones
When the battery is low (< 20%), the status LED (3) on the earphone flashes every 5 seconds twice
in succession and you will hear a signal tone once every minute .
The actual battery life will vary depending on how you use the device, the settings and the ambient
temperatures (rechargeable batteries have a limited life) .
Note
If you have not used the product for a few months, it can take up to 15 - 30 minutes until the
status LED (2/3) lights up red during the charging process .
USB-C
*not included
1
:30
h
1
:30
h
Place the earphones in the charging case .
Ensure that the earphones are inserted
into the correct sides, using the L/R
markings as a guide .
Connect a suitable USB-C charging cable
to the charging socket (7) on the charging
box .
Connect the free plug on the USB-C
charging cable to a suitable USB
charger . To do this, consult the operating
instructions for the USB charger you are
using .
m
m
CHARGED
7
Publicité
