Publicité
- Areas where paint is being removed should be sealed with 4
mm thick plastic sheeting.
- Sanding must be done in such a way as to reduce paint
run-off outside the working area.
Cleaning and waste
- All surfaces in the work area must be thoroughly vacuumed
and cleaned daily for the duration of the sanding project.
The contents of the dust collection tank must be emptied
frequently.
- Always empty the dust collection tank immediately after
switching off the tool. The dust in the dust tank and some
parts of the sander may burn in certain situations, e.g. if
sparks occur when sanding metal. In addition, the risk of
fire increases if the dust is mixed with paint, polyurethane
residues or other chemicals, or if the part you have sanded
is too hot. Check in the instruction manual of your vacuum
cleaner whether it is suitable for suction of the dust produced
by the sander.
- The plastic sheets must be collected and disposed of with
any paint residue. They should be deposited in sealed
receptacles and disposed of through normal waste collection
procedures. During cleaning, children and pregnant women
should be kept away from the immediate work area.
- All toys, washable furniture and utensils used by children
should be washed thoroughly before reuse.
24
PerfectSurface 180 Delta
Symbol
Meaning
Warning
Warning, flammable material
Information
For indoor use only
Class II tool
Wear a protective mask
Refer to the instruction manual/brochure
Wear protective gloves
Wear eye protection
Use hearing protection
25
PerfectSurface 180 Delta
Publicité
