Publicité
All manuals and user guides at all-guides.com
5
Operation
The recommended capacities stipulated in Chapter "Technical Data" must
Note:
not be exceeded, otherwise material will jam! Do not forget that the thick-
ness of the paper increases when folded, as a result of which the recom-
mended sheet capacity can be exceeded. Also reduce the quantity of pa-
per when shredding coarse paper.
5.1
Switching the device on
1. Set the On/Off switch to its ON position.
The POWER lamp lights up green.
2. Set the function switch to its middle position to the AUTO function. The device is
ready to operate.
5.2
AUTO function
When the AUTO function is activated, the shredding operation of the cutting mechanism
starts up automatically as soon as material is inserted in the infeed slot:
The device switches to forward drive and draws the material in.
●
When shredding is finished, the device switches off automatically.
●
The AUTO function is activated by setting the function switch to its middle position to
AUTO.
When the AUTO function is activated, paper can be shredded via the pa-
Note:
per infeed and CDs and credit cards shredded via the CD/credit card in-
feed. Only one infeed may be used at a time. If you use more than one in-
feed, the device stops. Pay attention to the permissible quantity of material
which can be shredded.
5.3
Inserting paper in the paper infeed
A maximum of 8 sheets of A4 paper with a weight of maximally 75 g/m
Note:
may be inserted in the paper infeed at a time.
1. The device is switched on and the AUTO function is activated .
2. Insert paper in the paper infeed.
22
2
Publicité
