Publicité
Connectivity
Wired Connectivity
To Connect to a Wired Network
• You must have a modem/router connected to an active
broadband connection.
• Connect your TV to your modem/router via an ethernet
cable. There is a LAN port at the rear (back) of your TV.
Broadband ISP connection
LAN (ethernet) cable
LAN input on the rear
side of the TV
To configure wired settings please refer to the Network/
Internet Settings section in the System>Settings
Menu.
• You might be able to connect your TV to your LAN
depending on your network's configuration. In such a
case, use an ethernet cable to connect your TV directly
to the network wall outlet.
network
wall socket
LAN input on the rear
side of the TV
Configuring Wired Device Settings
Network Type
The Network Type can be selected as Wired Device,
Wireless Device or Disabled, in accordance with the
active connection to the TV set. Select this as Wired
Device if you are connecting via an ethernet cable.
Internet Speed Test
Highlight Internet Speed Test and press the OK button.
TV will check the internet connection bandwidth and display
the result when complete.
Advanced Settings
Highlight Advanced Settings and press the OK button. On
the next screen you can change the IP and DNS settings
of the TV. Highlight the desired one and press Left or Right
button to change the setting from Automatic to Manual.
Now you can enter the Manual IP and / or Manual DNS
values. Select the related item in the drop down menu and
enter the new values using the numeric buttons of the re-
mote. Press the OK button to save settings when complete.
Wireless Connectivity (if available)
To Connect to a Wireless Network
The TV cannot connect to the networks with a hidden
SSID. To make your modem's SSID visible, you should
change your SSID settings via the modem's software.
To Connect to a wireless LAN, you should perform
the following steps:
1.
Then connect the wireless adaptor to one of the USB
inputs of the TV.
2.
To configure your wireless settings please refer
to the Network/Internet Settings section in the
System>Settings Menu.
A Wireless-N router (IEEE 802.11a/b/g/n) with
simultaneous 2.4 and 5 GHz bands is designed to
increase bandwidth. These are optimized for smoother
and faster HD video streaming, file transfers and wireless
gaming.
• The frequency and channel differ depending on the
area.
• The transmission speed differs depending on the
distance and number of obstructions between the
transmission products, the configuration of these
products, the radio wave conditions, the line traffic and
the products that you use. The transmission may also
be cut off or may get disconnected depending on the
radio wave conditions, DECT phones or any other WiFi
11b appliances. The standard values of the transmission
speed are the theoretical maximum values for the
wireless standards. They are not the actual speeds of
data transmission.
• The location where the transmission is most effective
differs depending on the usage environment.
• The Wireless LAN adaptor should be connected directly
to the TV's USB port. USB hubs are not supported. You
can plug your wifi dongle into a extension dock in cases
where network quality is poor and the wifi dongle needs
to be placed to a location with better signal quality.
English - 47 -
Broadband ISP
connection
Wireless LAN
adaptor
USB inputs on the
rear left side of the TV
Publicité
