Publicité
9. Enjoying music
To use the wireless headphones to listen to music from a Bluetooth
device, you must first perform pairing with the Bluetooth device using the
A2DP audio profile.
For details on how to perform pairing, see P.11.
(1) With power to the wireless headphones' turned off, hold the (#) button
depressed for about three seconds.
The headphones' power will turn on and the LED indicator will flashing
blue.
(2) Turn on the Bluetooth function on the device you wish to connect to.
When pairing is completed, the wireless headphones will automatically
connect to the Bluetooth device.
* If automatic connection is not achieved, or the headphones automatically
connect to a different Bluetooth device than the one you wish to use,
follow the instructions for the desired Bluetooth device regarding manual
connection.
* The unit's power will turn off automatically if it remains unconnected to
the Bluetooth device for five minutes.
Controls when listening to music
If the connected Bluetooth device supports AVRCP, the following operations
can be used.
• ( ) button
Press once : Return to beginning of track or chapter.
Press and hold : Increase volume.
• ( ) button
Press once : Advance to next track or chapter.
Press and hold : Decrease volume.
• ( # ) button
Press once : Play/Pause.
* When sound volume is set to maximum or minimum levels a beep sound
will be produced from the headphones.
* Sound volume can be adjusted on the matching Bluetooth device.
* Depending on the specifications of the connected Bluetooth device, the
controls noted above and controls on the Bluetooth device may not be
supported.
13
En
Publicité
