Publicité
1 | Mounting the WiRCU-BOX (WLAN)
38
EN
11) Wait until the message "Settings successfully transmit-
ted to WiRCU" appears. Then press "Finished".
12) Now disconnect the data cable from the WiRCU box.
Then shortly after, reconnect the cable.
13) Now wait until all 3 LEDs on the top of your WiRCU
box are permanently lit. (If this is not the case, repeat
the process according to the section
ð How to create the connection to your WLAN net-
work using an iOS device [}on page 34]
and/or follow the section
ð The WLAN network "WiRCU-XXXXXX" is not found
[}on page 40]).
14) Now enter the MAC address and PIN number of your
WiRCU box in the window that appears.
You can read this data on the side of the WiRCU box
or on the information card included in the delivery.
WiRCU-BOX
Publicité
