Publicité
WiRCU-BOX
1.2
How to attach the WiRCU box to the stove
EN
1 | Mounting the WiRCU-BOX (WLAN)
1) On the right-hand side of the rear panel of the stove
there are 2 boreholes with hexagon socket M4 x 8
screws prepared for the mounting of the WiRCU box.
These screws must be unscrewed with a 2 mm Allen
key before mounting.
2) Now mount the WiRCU box on the rear panel in the
position illustrated.
IMPORTANT: The connection for the data cable
should be located on the top of the WiRCU box. In this
position the MAC address and the PIN number on the
visible side of the WiRCU box can always be seen.
3) Now connect the data cable to the WiRCU box. Con-
nect the 2nd end to the free 6-pin socket below the
WiRCU box. This creates the connection between the
controls of your stove and the WiRCU box.
As soon as the heating appliance is supplied with
power, the "CONT" LED on the WiRCU box will be
constantly lit and the "WI-FI" LED will flash as follows:
0.5 sec. ON / 0.5 sec. OFF.
27
Publicité
