Publicité
Use
Ribs
Crank / Supporting arm
Rotary knob / Carriage
Mast
Swivel base / Pedal
Base (optional)
1
1.3
1.4
1.5
All manuals and user guides at all-guides.com
Cover
Ribbons
Opening the sunshade
1. Remove protective cover
2. Loosen ribbons
3. Detached the carriage by means of
rotary knob and slide it upwards
4. Completely open the sunshade
through use of the crack
5. Make sure that the inner parts are
engaging
!
The sunshade will be automatically
aligned horizontally. For safe
operation, the inner parts must be
completely engaged.
38
39
A
B
360°
C
3.1
3.2
4.1
4.2
2
Positioning of the sunshade
A
Tilt sunshade to mast
1. Release the rotary knob, adjust until
the desired inclination is reached
B
Tilting the sunshade left / right
1. Tilt the sunshade by cranking
C
Rotate sunshade
1. Step on the pedal
2. Turn the sunshade to the
requested position
3
Closing the sunshade
1. Release the rotary knob until the
sunshade is completely closed
2. Squeeze the Tilt handle, pull down the
carriage
4
Bind/protect the sunshade
1. Pull out / wrap fabric segments
2. Secure the sunshade with the ribbons
4.3
3. Lift the protective cover above the
sunshade section
4. Close the protective cover
!
To extend the service life of the cover-
ing material, GLATZ strongly recom-
mends the use of a protective sleeve
when the sunshade is closed.
Publicité
