Publicité
3
Operation
7. Connect the power plug to a suitable power
outlet.
8. The cutting speed can be variably adjusted with
the control dial
.
I
Notes
• To operate the blender at the low speed, turn the
control dial
to "1".
I
• If you want to blend with a higher speed, turn the
control dial
to the desired speed level (2-3).
I
• For short pulses of blending with a high speed,
turn the control dial
I
the control dial
, the blender will stop and re-
I
turn to "0" automatically.
• If ingredients are to be added during the blen-
ding process, then add them through the ope-
ning in the lid
. To do this, take out the cap/
B
measuring cup
.
A
9. After the desired consistency of the blended food
has been reached, turn the control dial
switch off the blender.
Caution
• Never run the blender for longer than 2 minutes,
otherwise it would overheat.
• After running the appliance for 2 minutes, let it
cool down before using it again.
• Be sure the motor has complete stopped before
removing glass jug
D
.
H
• Do not place any utensil (scraper, fork, etc.) in
the glass jug while blender is operating.
10. Pull the power plug out of the power outlet.
11. Take the glass jug
D
housing
by turning it counterclockwise and
H
lifting the glass jug upwards
12. Take off the lid and pour the mixture into
glasses or other containers.
Jug Blender / User Manual
All manuals and user guides at all-guides.com
to "P". When you release
to 0 to
I
from the motor housing
off from the motor
.
C
9 / 42 EN
Publicité
