Publicité
Operating Instructions
MaxLite 8ft Vapor Tight - LSV Series
®
Chain Suspended Mounting Installation Instructions (Continued)
7. Connect power supply to the driver through the
outlet box as shown in the figure (the flexible cord
is customer supplied), make sure to snap the
cover to the outlet box after wiring is completed.
ground wire
9. Reattach LED tray to fixture by reversing step 5.
© Copyright 2021 MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: info@maxlite.com
cover
outlet box
8. Follow the general wiring diagram above for
reference. Make sure that the power supply is
disconnected before installing.
10. Secure lens to housing with lens latches.
LSV Series
Page: 7
REV: 10/29/21
Publicité
