Télécharger Imprimer la page

MaxLite LSV Serie Mode D'emploi page 5

Publicité

Operating Instructions
MaxLite 8ft Vapor Tight - LSV Series
®
Surface Mounting Installation Instructions (Continued)
8. Reattach LED tray to fixture by reversing step 4.
Note:
• Connect the flexible cord (SJTW 18AWG) to the junction box, and cover the junction box with the UL listed
canopy. Make sure to provide a strain relief at the canopy side.
• Ensure that the gap is sealed with glue.
• Be sure to provide with a wet location rated strain relief.
Chain Suspended Mounting Installation Instructions
1. Attach V-bracket to each mounting clip by
spreading the ends of the V-bracket apart
and then inserting the legs into the holes in
the side of the mounting clips.
© Copyright 2021 MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: info@maxlite.com
9. Secure lens to housing with lens latches.
2. Secure mounting clips to housing recesses
by firmly pressing them into place until both
sides of the clip are secured. Hang fixture
from customer supplied chain using
V-brackets.
LSV Series
Page: 5
REV: 10/29/21

Publicité

loading

Ce manuel est également adapté pour:

Lsv8u65wcs105687