Miscellaneous; Cleaning And Maintenance - Medisana MC 830 Mode D'emploi

88944_MC830_Gel_West_17092015.qxd:Shiatsu-Massageauflage
• The heat function can be activated at any time with the shiatsu massage, during which the vibration
massage can also be activated. Press the heat button
up. The heat is radiated across the vertical central axis of the entire back area. At the same time
infrared light is at work in the Shiatsu massage cushion
the heat function; the red LED extinguishes.
Switch off the device
• Press the On/Off button
back down to the "Park" position. When this position is reached, the yellow LED extinguishes. If you
press the On/Off button
and the heat function just stop immediately. First the massage heads travel downwards to the "Park"
position. The yellow LED flashes meanwhile and then extinguishes.
• After each use, switch the device off using the O
mains socket. Always store control pad

4 Miscellaneous

4.1 Cleaning and maintenance

• Before cleaning the device, make sure that it is turned off and the mains plug is removed from the
socket. Allow the unit to cool down.
• Only clean the Shiatsu massage seat cover with a soft cloth slightly dampened with a mild detergent
(e.g. soap suds). Under no circumstances should you use aggressive detergents, strong brushes,
solvents or alcohol.
• When cleaning, never immerse the unit in water and make sure that no water gets into the unit.
• Wait until the device is completely dry before using it again.
• Undo any kinks in the cable.
• You should ideally store the device in its original packaging and keep it in a clean, dry place.
4.2 Disposal
This product must not be disposed of together with domestic waste.
All users are obliged to hand in all electrical or electronic devices, regardless of whether
or not they contain toxic substances, at a municipal or commercial collection point so that
they can be disposed of in an environmentally acceptable manner.
Consult your municipal authority or your supplier for information about disposal.
3 Operating / 4 Miscellaneous
. The yellow power LED begins
when one of the massage functions is switched on, the vibration motors
n/Off switch
in its bag
17.09.2015
to activate the function; the red LED lights
. Press the button again to deactivate
to flash and the massage heads travel
and remove the plug
.
17:51 Uhr Seite 15
GB
from the
15