Publicité
Surface elements will cycle on and off to maintain
Element
the temperature you have selected. All radiant
Cycling
surface elements have a temperature limiter that
protects the glass cooktop from getting too hot,
this is normal. The temperature limiter may cycle
the elements off more frequently if:
Turn Burner(s) On: Touch and hold On/Off pad
Operating
about half a second. A chime can be heard with
The Cooking
each touch to any pad.
Elements
Power level can be selected in any of the
following ways:
1. Swipe the gray arc (on the graphics) to the
2. Touch Anywhere along the gray arc, or;
3. Touch + or - pads to adjust power level, or;
4. Shortcut to Hi: Immediately after turning unit
5. Shortcut to Low: Immediately after turning unit
The burner ring size is adjustable on some
Adjust
elements. The ring size can be selected by
Burner Size
pressing the burner ring graphic.
12
desired power level. There is no sensor on the
LEDs, or;
on, touch the + pad, or;
on, touch the - pad.
Using Your Cooktop
Radiant Cooktop
• The pan boils dry.
• The pan bottom is not flat.
• The pan is off-center.
• There is no pan on the element.
LED
Gray Arc Swipe Area
Lights
Single Surface
Dual Surface
Element
Element
Gray Arc
Swipe Area
Tri-Ring Surface
Element
Publicité
