Publicité
Shake (Optional)
Note: If you want to use the Shaker option, it is recommended to connect power adaptor
(9V
1A, AC/DC) in addition to the batteries. This shaker will vibrate every time the
base receives an alert.
Pad On/Off :
Pad On Indicator : If the Shaker On/Off switch is in the On position, the LED indicator
Pad OUT :
Note:
The shaker can be used for all zone icons.
●
The shaker can be bought separately (CLA2).
●
WIRING AND SETTING the door opening function
You have the possibility to command your door opening automatically, if the
captor of zone icon 5 or 6 receives a trigger signal. Check the user guide of your
gate trigger to connect your door opening device to the AMPLICALL
Using a small
screwdriver, press
the lever and insert
the wire inside the
hole. Then release
the lever to hold the
wire.
Normal Open
(NO)
Normal Close
(NC)
DC9V,
1A
DC
jack
Shaker plug
Slide the PAD switch to turn ON or OFF the vibration function.
will light up to indicate vibration function is activated.
Plug the Shaker into this jack.
9V out
9V Ready Indicator
Pad On Indicator
Pad On/Off Switch
7
TM
100.
Publicité
