Publicité
Replacing the zone icon plate
After pairing your device (AC101, AC110 or AC140), do not forget to change the zone
icon image that is provided with the device (AC101, AC110 or AC140).
1. Open the battery cover (fig
2. Slide down and lift up the transparent flasher cover (fig
3. Push the bottom of the zone icon image to remove it (fig
4. Put the new icon plate delivered with your device (AC101, AC110 or AC140) into
the slot (fig
5. Press the top of the icon plate to fix it (fig
6. Install the transparent cover (first, insert the top and then clip the bottom of the
transparent plastic; you should hear a beep) (fig
7. Install the battery cover.
).
).
).
6
).
).
).
Publicité
