Publicité
5 | SETTINGS
5.3
Setting the temperature control
6.
Set the hour of the first switch-off time
Set the minutes of the first switch-off
7.
time
8.
Repeat steps 4 to 7 for the switch-on/switchoff times 2 and 3
Non DVGW-compliant setting.
AA2
Warns if the daily switch-off time is over 8 hours.
9.
Select the standard display
1.
2.
Select the temperature control (flashing)
Set the temperature.
60 °C
3.
Can be set between 40 – 70 °C
Temperature control is switched off.
no °C
The pump runs independently of the
return temperature.
Non DVGW-compliant setting.
AA1
Warns if the temperature is below 55 °C.
4.
Switch thermal disinfection on or off.
5.
Select the standard display
SECONDARY HOT WATER CIRCULATION PUMP EV-ZUP-T 15 PLUS
31
Publicité
