Proper Beverage Center Care And Cleaning; Cleaning And Maintenance; Power Interruptions; Vacation & Moving Care - Haier BC100GS Guide De L'utilisateur

English

Proper Beverage Center Care and Cleaning

Cleaning and Maintenance

WARNING:
CAUTION:
General:
Door Gaskets:

Power Interruptions

• Occasionally there may be power interruptions due to thunderstorms or other
causes. Remove the power cord from AC outlet when a power outage occurs.
When power has been restored, replug power cord to AC outlet.
Vacation and Moving Care
• For long vacations or absences, empty food from beverage center and clean
the beverage center and door gaskets according to "General Cleaning"
section. Leave doors open, so air can circulate inside.
• When moving always move the beverage center vertically. Do not move with
the unit lying down, as possible damage to the sealed system could occur.
Note: After moving, wait for 24 hours before plugging in the beverage center.
11
To avoid electric shock, always unplug your
Beverage Center before cleaning. Ignoring this
warning may result in death or injury.
Before using cleaning products, always read and
follow manufacturer's instructions and warnings to
avoid personal injury or product damage.
• Prepare a cleaning solution of 3-4 tablespoons of baking soda
mixed with warm water. Use sponge or soft cloth, dampened
with the cleaning solution, to wipe down your beverage center.
• Rinse with clean warm water and dry with a soft cloth.
• Do not use harsh chemicals, abrasives, ammonia, chlorine
bleach, concentrated detergents, solvents or metal scouring
pads. Some of these chemicals may dissolve, damage and/or
discolor your beverage center.
Clean door gaskets every three months according to general
instructions. Gaskets must be kept clean and pliable to assure a
proper seal
• Petroleum jelly applied lightly on the hinge side of gaskets will
keep the gasket pliable and ensure a good seal.