Beverage Center Features And Use; Initial Setup; Temperature Adjustment; Sabbath Mode - Haier BC100GS Guide De L'utilisateur

English

Beverage Center Features and Use

Initial Setup

Once you have plugged the unit into an electrical outlet, let the unit run for at
least 30 minutes to acclimate itself before making any adjustments. The LED
display will show the current internal temperature.
Temperature Adjustments:
• The beverage center can be set to any temperature between 39˚ and 62˚F to
accommodate your storage requirements. To set the temperature hold the "Set"
button for about 3 seconds. You will notice the temperature display blink.
Fig.#1

Sabbath Mode

• Press and hold "^" and "v" at the same time for 3 seconds, buzzer will ring
once, display panel will flash 5 times and stop. This indicates that the unit
has entered Sabbath mode. In this mode, normal cooling operations still take
place (compressor, magnetic valve, fan) but all luminous equipment including
display panel and LED bulb will shut off no matter if the door is opening or
closing. Press and hold "^" and "v" at the same time for 3 seconds, after dis-
play panel flahses 5 times, you cna exit from Sabbath mode.

Alarm System

Door Ajar Alarm- If the door of the unit is kept open for long time and affect
temperature so much , the system will give an alarm, if you want to stop it, press
"SET" button.

Capacity

The capacity of beverage center is 150 cans. The quantity may vary if the type
or the size of the beverage center & can change.
9