Danby One plug SMM-7A1 Guide D'utilisation Et Soins De Propriètaire page 8

SIGNALS DURING OVEN SETTINGS
ONE BEEP: Oven accepts the entry.
TWO BEEPS: Oven does not accept the entry, check and try again.
SETTING THE CLOCK
1. Touch CLOCK pad.
2. Use the number pads to enter the correct time.
3. Touch CLOCK pad again.
NOTE:
•This is a 12-hour cycle clock. When the oven is first plugged in or when power resumes after a power interruption, the dis-
play will show ENTER CLOCK TIME. If you prefer not to have the clock displayed, touch RESET.
SETTING THE OVEN TIMER
1. Touch TIMER.
2. Enter the amount of time by touching the number pads.
3. Touch START/STOP.
NOTE:
• The maximum time you can enter is 99 minutes and 99 seconds.
• Time countdown can be seen on the display before clock or cooking time returns to the display.
• Touch TIMER and then touch RESET to cancel TIMER during timing process.
SETTING A COOKING PROGRAM
A. One-stage Cooking
1. Use the number pads to set a cooking time. You can set a cooking time from one second to 99 minutes and 99 seconds.
2. If you want to set a power level other than 100% power, touch POWER LEVEL and then use the number pads to enter
the power level.
3. Touch START/STOP to start cooking.
B. Two-stage Cooking
Some recipes require different stages of cooking at different temperatures.
1. SET STAGE 1:
Follow steps 1 and 2 in "One-stage Cooking". DO NOT TOUCH START/STOP.
2. SET STAGE 2:
Touch COOK then enter proper cooking time and (lower) power level. (Most 2-stage recipes use lower power for second
stage.)
3. Touch START/STOP.
OPERATION INSTRUCTIONS
Number Pad
10
9
8
7
6
5
4
3
2
1
0
Cooking Power
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
7