Publicité
Figure 1
Figure 2
Figure 3
PAGE 2 OF 6
All manuals and user guides at all-guides.com
ASSEMBLY INSTRUCTIONS
1. Verify all parts are present before beginning. Hardware
2. Flip the tabletop upside down. Take one leg at a time
Right
Left
3. Insert the cross brace with the umbrella holder facing
Underside
of Table
Underside
of Table
4. Flip the table upright and loosely attach the three
5. Ensure the tabletop and bench seats are level, then
1-800-295-5510
uline.com
is located in a white box.
and loosely attach to the tabletop using one bolt,
one washer and one nut. The leg braces are an inside
mount. The legs are labeled left and right. Match the
legs to the left and right markings on the underside of
the table. (See Figure 1)
upward and loosely bolt to the corresponding corners
using one bolt, one washer and one nut.
(See Figure 2)
bench seats to the legs with the leg braces having an
inside mount. (See Figure 3)
tighten each bolt, finishing with the cross brace.
NOTE: H-2300 mounting hardware sold
separately.
0321 IH-2671
Publicité
